你好,欢迎来到世铝网 [请登录] [免费注册]
世铝网 铝业产品
您当前的位置: 世铝网 铝业产品 铝型材 CC-TDOB01 IOTA, (32) DO卡底座 4

CC-TDOB01 IOTA, (32) DO卡底座

加入收藏 举报
详细信息

产品标题:CC-TDOB01,Digital Output 24V Buss IOTA, (32) DO卡底座

型号: CC-TDOB01

品牌:霍尼韦尔

                                                                 产品详情资料


输出默认值如果启用“保持***状态”,当CPU指示“输出未启用”时,或者如果出现下列故障之一,输出将保持其***命令值。如果禁用“保持***状态”,则命令输出变为“默认值”。在选定的输出范围内设置默认值。如果“默认值”(Default Value)和“渐变速率”(Ramp Rate)均已启用,则通道将渐变为默认值。故障条件为:? CPU输出未启用? 背板电源不正常。在这种情况下,即使已启用斜坡,也没有斜坡。? 失去与CPU的通信。? I/O通信丢失。? 磁场功率损失。输出默认注释? 在I/O启用模式下热移除模块将导致所有输出保持***状态(甚至配置为强制默认值的通道)。如果不需要该操作,则可通过首先关闭现场电源并在热卸下模块之前卸下模块的接线板,将输出强制设置为默认值。

                         产品英文详情料:

Output Defaults If Hold Last State is enabled, an output will hold its last commanded value when the CPU indicates Outputs Not Enabled, or if one of the fault conditions listed below occurs. If Hold Last State is disabled, the output is commanded to go to the Default Value. The Default Value must be set within the selected output range. If both Default Value and Ramp Rate are enabled, the channel will ramp to the default value. Fault conditions are: ? CPU outputs are not enabled ? Backplane power is not ok. In that case, there is no ramping, even if ramping has been enabled. ? Loss of communications from CPU. ? Loss of I/O communications. ? Loss of field power. Outputs Default Notes ? Hot Removal of the module in an I/O Enabled mode will cause all outputs to Hold Last State (even channels configured for Force to Default Value). If that operation is not desirable, the outputs can be forced to default by first turning off field power and removing the module’s Terminal Block before hot-removing the module.

免责声明:

AMIKON我们销售新产品和停产产品,独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的,并不表示与任何权利持有人有任何关联或授权。


BENTLY NEVADA330709-000-070-10-02-00FOXBOROP0916VB
BENTLY NEVADA330709-000-070-10-02-00 FOXBOROP0916VC
BENTLY NEVADA330709-000-130-10-02-00FOXBOROP0916VL
BENTLY NEVADA330709-050-120-10-02-00FOXBOROP0916VM 
BENTLY NEVADA330730-040-00-00FOXBOROP0916WE
BENTLY NEVADA330730-040-00-00 FOXBOROP0916WF 
BENTLY NEVADA330730-040-03-00FOXBOROP0916WG 
PROSOFTMVI71-AFCSchneider140CPU43412A 
PROSOFTMVI71-MNETSchneider140CPU53414A
PROSOFTMVI94-ADMSchneider140CPU65150C
PROSOFTMVI94-GSC-ESchneider140CPU65160S
PROSOFTMVI94-MCMSchneider140CPU67060
PROSOFTPC56-2K-IDESchneider140CRA21220
PROSOFTPLX31-EIP-MBSSchneider140CRA93100








联系方式
  • 联系人: 吴工 女士
  • 电话: 0592-5085207
  • 手机: 18030175270
  • 地址: 福建省 厦门市 思明区湖滨南路388号国贸大厦32D单元
还没找到合适的产品?
  • 01
  • 快速发布求购信息
  • 下一步
  • 02
  • 试试以下相关搜索:
  • 03
  • 联系cnal客服:
  • 致电: 0371-63388900
    马上启动您的快速采购通道!