CV-QKBLDRQuick快速生成器

产品标题:CV-QKBLDRQuick Builder快速生成器 - SCADA数据库配置工具

型号： CV-QKBLDR

品牌：霍尼韦尔

                                                                    产品详情资料：

接线

1、 硬件设备之间的连接

这种连接在控制室内部进行，大多采用多芯屏蔽双绞线或同轴电缆，用标准化的插件插接。

这些电缆称为系统电缆，种类多，所以工作时要仔细、谨慎，不能插错，并做好检查工作。

2、 DCS系统和在线仪表的连接

这是控制室与现场仪表的连接，量大点多，一般会有两种形式：

l  一根电缆从头到底，也就是现场仪表或执行机构的两芯电缆直接连到控制室DCS系统相应的模件接线端子；

l  控制室通过多芯主电缆连接到现场点集中的地方，通过接线盒再分别用两芯电缆与每个现场仪表或执行机构连接。

由于接线点数较多，每个点准确无误，牢固可靠，排列整齐、美观。

这组手册包括（除其他外）：?紧急信息?一般信息?入门、IRC5和RobotStudio?RAPID简介?带FlexPendant的IRC5?RobotStudio？控制器和操纵器的故障排除。人员机器人无论其速度如何，都非常重且非常强大。运动暂停或长时间停止后，可能会出现快速危险运动。即使预测到移动模式，也可能会由外部信号触发操作变化，从而导致意外移动。因此，在进入受保护的空间时，遵守所有规定

                          产品英文详情资料：

connection

1. Connection between hardware devices

This type of connection is carried out inside the control room, mostly using multi-core shielded twisted pair or coaxial cables, with standardized plug-in connections.

These cables are called system cables and have a variety of types, so when working, it is necessary to be careful and cautious, never plug them in incorrectly, and do a good job of inspection.

2. Connection between DCS system and online instruments

This is the connection between the control room and on-site instruments, which has a large quantity and usually comes in two forms:

A cable is connected from the beginning to the bottom, that is, the two core cable of the on-site instrument or actuator is directly connected to the corresponding module wiring terminal of the DCS system in the control room;

The control room is connected to a centralized location on site through a multi-core main cable, and then connected to each on-site instrument or actuator through a junction box using two core cables.

Due to the large number of wiring points, each point must be accurate, firm, reliable, neatly arranged, and aesthetically pleasing.

The group of manuals includes (among others): ? Emergency safety information ? General safety information ? Getting started, IRC5 and RobotStudio ? Introduction to RAPID ? IRC5 with FlexPendant ? RobotStudio ? Trouble shooting, for the controller and manipulator.Safety of personnel A robot is heavy and extremely powerful regardless of its speed. A pause or long stop in movement can be followed by a fast hazardous movement. Even if a pattern of movement is predicted, a change in operation can be triggered by an external signal resulting in an unexpected movement. Therefore, it is important that all safety regulations are followed when entering safeguarded space.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。