DS200TBQDG1ACC RST板卡

产品标题: DS200TBQDG1ACC RST板卡

型号： DS200TBQDG1ACC

品牌：GE

                                                                                 产品详情资料：

MVME162通过位于J4附近的1A保险丝（F1）向远程LED/开关连接器（J4）提供+5 Vdc电源。连接器J4是远程控制和指示面板的接口。如果LED都不亮，且ABORT和RESET开关不工作，检查保险丝F1

轻轻按压SIM卡的顶部，使其位于连接器上。如果SIM卡未轻轻按压到位，请重新检查方向。如果SIM卡连接器方向不正确，安装孔将不会与支座对齐。如果SIM卡方向不正确，请勿强行将之前拆下的两个4-40 x 3/16“十字头螺钉（或新SIM卡附带的螺钉）插入两个相对的记录仪安装孔。

避免仅从一侧提起SIM卡，因为SIM卡或主板上的连接器可能会损坏。将SIM卡放在***的容器中，以便再次使用。安装新SIM卡1。观察SIM卡连接器J1和MVME162连接器J10上的连接器键的方向。转动SIM卡，使键对齐，然后将其轻轻地放在连接器J10，将SIM拐角处的安装孔与MVME162上的匹配支座对齐。

                          产品英文详情资料：

The MVME162 provides +5 Vdc power to the remote LED/switch connector (J4) through a 1A fuse (F1) located near J4. Connector J4 is the interface for a remote control and indicator panel. If none of the LEDs light and the ABORT and RESET switches do not operate, check fuse F1

Gently press the top of the SIM to seat it on the connector. If the SIM does not seat with gentle pressure, recheck the orientation. If the SIM connector is oriented incorrectly, the mounting holes will not line up with the standoffs.Do not attempt to force the SIM on if it is oriented incorrectly Place the two 4-40 x 3 /16” Phillips-head screws that you previously removed (or that were supplied with the new SIM) into the two oppositecorner mounting holes.

Avoid lifting the SIM by one side only, as the connector can be damaged on the SIM or the main board.Place the SIM in a static-safe container for possible reuse.Installation of New SIM 1. Observe the orientation of the connector keys on SIM connector J1 and MVME162 connector J10. Turn the SIM so that the keys line up and place it gently on connector J10, aligning the mounting holes at the SIM corners with the matching standoffs on the MVME162.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。