3500/45-01-00机械量仪配件

产品标题: 3500/45-01-00机械量仪配件

型号： 3500/45-01-00

品牌： 本特利

                                                                              产品详情资料：

3500/45胀差监测器是一个四通道监测器，它从涡流传感器接收输入信号，并用该信号驱动报警。利用3500框架组态软件为3500/45编程，可以执行以下任何一种功能:胀差、补偿式输入胀差、机壳膨胀（CH3、CH4）。3500/45监测器使用位移输入/输出模块，该模块能接收来自以下本特利传感器的输入信号。

涡流传感器：25、35和50mm扩展范围传感器及LVDT。

3500/45监测器的基本作用是提供1)机械保护，通过连续不断地比较当时的转子位移与报警设置点来驱动报警2)将重要的转子位移信息给操作人员和维修人员。报警设置点可用3500框架组态软件来设置。可为每个有效成比例值设置报警设置点，也可根据监测器类型为每一个或两个有效成比例值设置危险设置点。

当远离厂家时，3500/45是以未组态过的形式交货的。当需要时，3500/45可以被安装进3500框架，进行组态以执行所要求的监测功能。

3500/45 差胀/轴向位置监测器是一个可接收趋近式涡流传感器、旋转位置传感器(RPT)、DC 线性可变微分变换器(DCLVDT)、AC 线性可变微分变换器(AC LVDT)和旋转电位计输入信号的4 通道监测器。

3500 框架组态软件，3500/45 可被编程去完成如下功能：  

轴向（侧向）位置 ;

差胀 ;

标准单斜面差胀 ;

非标准单斜面差胀 ;

双斜面差胀 ;

补偿式差胀 ;

壳胀 ;

阀门位置

监测器通道成对编程，每次多能完成上述的两个功能。通道1 和2 能完成一个功能，而通道3 和4 能实现另外一个(或同一个)功能。但是，只有通道3 和4 能实现壳胀监测。

                         产品英文详情资料：

The 3500/45 differential expansion monitor is a four channel monitor that receives input signals from eddy current sensors and uses this signal to drive alarms. Using the 3500 Rack Configuration Software to program 3500/45, it is possible to perform any of the following functions: differential expansion, compensated input differential expansion, and casing expansion (CH3, CH4 only). The 3500/45 monitor uses a displacement input/output module that can receive input signals from the following Bentley sensors.

Eddy current sensors: 25, 35, and 50mm extended range sensors and LVDT.

The basic function of the 3500/45 monitor is to provide 1) mechanical protection, which drives alarms by continuously comparing the rotor displacement with the alarm set point at that time. 2) Provide important rotor displacement information to operators and maintenance personnel. Alarm setpoints can be set using the 3500 rack configuration software. Alarm setpoints can be set for each valid proportional value, or danger setpoints can be set for each or both valid proportional values based on the monitor type.

When away from the manufacturer, the 3500/45 is delivered in an unconfigured form. When needed, the 3500/45 can be installed into the 3500 rack for configuration to perform the required monitoring functions.

The 3500/45 differential expansion/axial position monitor is a 4-channel monitor that can receive input signals from approaching eddy current sensors, rotating position sensors (RPT), DC linear variable differential converters (DCLVDT), AC linear variable differential converters (AC LVDT), and rotating potentiometers.

3500 Rack Configuration Software, 3500/45 can be programmed to perform the following functions:

Axial (lateral) position;

Differential expansion;

Standard single slope differential expansion;

Non standard single slope differential expansion;

Double slope differential expansion;

Compensated differential expansion;

Shell expansion;

Valve position

Monitor channels are programmed in pairs, capable of completing up to two functions at a time. Channels 1 and 2 can perform one function, while channels 3 and 4 can perform another (or the same) function. However, only channels 3 and 4 can achieve shell expansion monitoring.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。