IS215VCMIH1B VME通信接口卡

产品标题: FanucIS215VCMIH1B VME通信接口卡

型号： IS215VCMIH1B

品牌： GE

                                                                              产品详情资料：

IC698CPE010是GE Fanuc RX7i系列的一款中央处理器。该设备能够实时控制工业机械和材料过程。它通过安装在机架上的VME64连接背板与其他设备和模块进行通信。

IC698CPE010具有300MHz赛扬微处理器，能够执行浮点计算。每个布尔函数的标准速度为每个线圈0.33ms。该设备的其他功能包括但不限于以下内容：三个嵌入式串行端口和两个以太网端口、位字参考支持、符号变量支持、测试编辑模式以及网络数据监控。

该设备具有10兆字节的RAM存储器，用于存储数据和编程信息。该存储器由CMOS电池维持。还提供了额外的10兆字节的非易失性闪存（NVRAM）。操作系统固件数据存储在闪存中。固件可以在不拆开设备或更换EPROM的情况下进行更新。

操作IC698CPE010有两种方式：三位运行/停止开关，将设备连接到计算机并运行适当的软件。可以通过串行或以太网端口将此设备连接到计算机。注意：使用以太网端口需要IP寻址和Cat5电缆。对于串行连接，使用SNP协议。对于该设备的配置和编程，所附计算机上使用Proficy Machine Edition PLC Logic Developer软件。配置数据由密码保护。

安装IC698CPE010时，请按照产品手册中的说明进行操作。禁用机架电源。记录设备的媒体访问控制（MAC）地址。将设备牢固地安装并接地到机架的一个插槽，即指定的CPU插槽中。连接以太网和串行端口。重新启用机架电源。将CMOS电池连接到其中一个连接器。开始对设备进行编程。

IC698CPE010 CPU是通用电气发那科中央处理器。它是RX7i PACSystems系列的工业中央处理器单元。它有助于控制不同的工业应用。CPU配有300 MHz赛扬处理器，支持高达100 Mbps的以太网速度。CPU具有可在额定功率下保持40天内存的功能。CPU具有10 MB的非易失性闪存用户存储器。它由5伏总线电压供电，额定电流为3.2安培。它可以以每1000个布尔触点/线圈0.195毫秒的速度执行布尔表达式。它的度为每天9秒。CPU多可监控16个web服务器和FTP连接。它的设计非常紧凑，重量只有6.3公斤。它可以很容易地安装在带有背板的机架上。工作温度应设置在0到60摄氏度之间。

GE Fanuc IC698CPE010 CPU通过使用模块正面VME 64标准格式的以太网端口与编程器和HMI设备进行通信。CPU通过使用引用表来提供对大容量存储器的访问。它可以使用不同的编程语言进行编程，包括梯形图、结构化文本和功能框图语言。IC698CPE010 CPU配备了支持Modbus RTU从站、SNP和串行I/O协议的串行端口。CPU支持多达512个程序块。它还允许“测试编辑”模式，可以对正在运行的程序进行修改。IC698CPE010 CPU还支持远程工作站管理器。

                         产品英文详情料:

The IC698CPE010 is a Central Processing Unit from the GE Fanuc RX7i series. This device is capable of controlling industrial machinery and material processes in real-time. It communicates with other devices and modules through a VME64 connection backplane mounted to the rack.

The IC698CPE010 has a 300MHz Celeron microprocessor capable of performing floating point calculations. The standard speed of each Boolean function is 0.33ms per coil. Other features of this device include but are not limited to the following: three embedded serial ports and two Ethernet ports, bit-in-word reference support, symbolic variable support, a Test Edit mode, and data monitoring over the web.

This device has 10 megabytes of RAM memory for data and programming information. This memory is sustained by a CMOS battery. An additional 10 megabytes of non-volatile flash memory (NVRAM) is also provided. The operating system firmware data is stored in flash memory. Firmware can be updated without taking apart the device or replacing the EPROMs.

There are two means to operate the IC698CPE010: the three-position run/stop switch and connecting the device to a computer and running the appropriate software. Connecting this device to a computer is possible via the serial or Ethernet ports. Note: Using the Ethernet port will require IP addressing and a Cat5 cable. For serial connections, the SNP protocol is used. For configuration and programming of this device, Proficy Machine Edition PLC-Logic Developer software is used on the attached computer. Configuration data is secured with a password.

Follow the instructions in the product manual while installing the IC698CPE010. Disable rack power. Document the Media Access Control (MAC) address of the device. Securely mount and ground the device into slot one of the rack, the designated CPU slot. Connect the Ethernet and serial ports. Re-enable power to the rack. Connect the CMOS battery to one of the connectors. Begin programming the device.

The IC698CPE010 CPU is a GE Fanuc Central Processing Unit. It is an industrial central processor unit from the RX7i PACSystems series. It helps to control different industrial applications. The CPU comes with a 300 MHz Celeron processor and it supports Ethernet speeds of up to 100 Mbps. The CPU features memory retention for 40 days of nominal power. The CPU has 10 MB of non-volatile flash user memory. It is powered with 5 Volts bus voltage and it has a current rating of 3.2 Amps. It can execute boolean expressions with a speed of 0.195 milliseconds per 1000 Boolean contacts/coils. It has an accuracy of 9 seconds per day. The CPU can monitor up to 16 web server and FTP connections. It is designed to be compact and it weighs only 6.3 kilograms. It can be easily mounted on a rack with the backplane. The operating temperature should be set between 0 and 60 degrees Celsius.

The GE Fanuc IC698CPE010 CPU communicates with the programmer and HMI devices by using Ethernet ports with the VME 64 standard format on the front side of the module. The CPU provides access to bulk memory by using a reference table. It can be programmed by using different programming languages including the ladder diagram, structured text, and functional block diagram languages. The IC698CPE010 CPU is equipped with serial ports that support the Modbus RTU slave, SNP, and Serial I/O protocols. The CPU features support for up to 512 program blocks. It also allows the “test edit” mode that can make modifications for a running program. The IC698CPE010 CPU also supports remote station managers.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。