BENTLY133442-01带内部终端的转

BENTLY NEVADA 133442-01 带内部终端的转速表模块I/O模块

BENTLY NEVADA 133442-01 带内部终端的转速表模块I/O模块

                                                                              产品详情资料：

500系统配有两种类型的继电器模块。第一种是4通道继电器模块。该模块适用于绝大多数的监测应用。它利用一个继电器驱动每条通道的出。4通道继电器模块是一个可提供4个继电器输出的全高模块。任何数量的4通道继电器模块，都可以放置在框架接口模块右侧的任意一个插槽内。每个继电器输出都可利用与(AND)和或(OR)运算器编程。每一继电器通道的报警驱动逻辑，都可应用来自框架中任何监测器通道的报警输入(警告和危险)。报警驱动逻辑应用框架组态软件编程。报警驱动逻辑器的三种普通类型是母线继电器、继电器和独立继电器，母线继电器应用一个报警驱动逻辑器，对框架里的所有通道的警告或危险信号进行“或”运算，来驱动一个单独的继电器。继电器应用的报警驱动逻辑器，是对监测器中的通道对(通道l和通道2或通道3和通道4)上的警告或危险情号进行“或”运算，来驱动一个继电器。独立继电器应用的报警驱动逻辑器，可以使来自一个通道上的每个报警状态(警告或危险)，去驱动一个独立的继电器。

4 通道继电器模块是一个全高度的模块，它可提供四个继电器的输出量。任何数量的4 通道继电器模块，都可放置在框架接口模块右边的任一个槽位里。4 通道继电器模块的每个输出都可以独立编程，以执行所需要的表决逻辑。

每个应用在4 通道继电器模块上的继电器，都具有“报警驱动逻辑”。该报警驱动逻辑可用“与门”和“或门”逻辑编程，并可利用框架中的任何监测器通道或任何监测器通道的组合所提供的报警输入(警告或危险)。该报警驱动逻辑应用框架组态软件编程，可满足应用中的特殊需要。

                         产品英文详情料:

The 500 system comes with two types of relay modules. The first type is a 4-channel relay module. This module is suitable for the vast majority of monitoring applications. It utilizes a relay to drive the output of each channel. The 4-channel relay module is a full height module that can provide 4 relay outputs. Any number of 4-channel relay modules can be placed in any slot on the right side of the frame interface module. Each relay output can be programmed using AND and OR operators. The alarm driving logic of each relay channel can be applied to alarm inputs (warning and danger) from any monitor channel in the framework. Programming of alarm driven logic application framework configuration software. The three common types of alarm driven logic devices are bus relays, relays, and independent relays. Bus relays use an alarm driven logic device to perform an "OR" operation on the warning or danger signals of all channels in the framework to drive a separate relay. The alarm driven logic for relay applications is an OR operation performed on the warning or danger signals on channel pairs (channels 1 and 2 or 3 and 4) in the monitor to drive a relay. The alarm driver logic for independent relay applications can enable each alarm state (warning or danger) from a channel to drive an independent relay.

The 4-channel relay module is a full height module that can provide the output of four relays. Any number of 4-channel relay modules can be placed in any slot on the right side of the frame interface module. Each output of the 4-channel relay module can be independently programmed to execute the required voting logic.

Each relay applied to a 4-channel relay module has an "alarm drive logic". The alarm drive logic can be programmed with "AND" and "OR" logic, and can use the alarm input (warning or danger) provided by any monitor channel or any combination of monitor channels in the frame. The alarm driven logic application framework configuration software programming can meet special needs in applications.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。