BENTLY133323-01MOD总线

BENTLY NEVADA 133323-01 MOD总线RS-485 I/O模块

BENTLY NEVADA 133323-01 MOD总线RS-485 I/O模块

                                                      产品详情资料：

三通道超速保护系统提供3个独立的转速监测通道。在报警时，三通道超速保护系统可组态成能提供3选2的表决功能。具有这种功能时，来自每个模块的报警输出进行比较，在继电器被驱动前，两个模块一致。

133388-01  3500/53 超速检测模块

133396-01 超速检测I/O 模块

288062-01 3500/53M Overspeed Detection Module

323133-01 Overspeed Detection I/O Module

常用型号

3500/50-01-00-01(288062-02,133442-01)

3500/50-02-00-01

3500/50-03-00-01

3500/32  4通道继电器模块 

3500/32 4 通道继电器模块是一个全高度的模块，它可提供四个继电器的输出量。任何数量的4 通道继电器模块，都可放置在框架接口模块右边的任一个槽位里。4 通道继电器模块的每个输出都可以独立编程，以执行所需要的表决逻辑。  

每个应用在4 通道继电器模块上的继电器，都具有“报警驱动逻辑”。该报警驱动逻辑可用“与门”和“或门”逻辑编程，并可利用框架中的任何监测器通道或任何监测器通道的组合所提供的报警输入(警告或危险)。该报警驱动逻辑应用框架组态软件编程，可满足应用中的特殊需要。  

注意:  需要三重模块冗余(TMR)的情况下应使用3500/34 TMR 继电器模块。 

前面板LED含义： 

OK LED（发光二极管）：模块工作正常时闪亮  

TX/RX LED：用于传送和接收，当该模块与框架中其它模块间通讯正常时闪亮  

CH ALARM LED：当该继电器通道处于报警状态时闪亮  

                         产品英文详情资料：

The three channel overspeed protection system provides three independent speed monitoring channels. When giving an alarm, the three channel overspeed protection system can be configured to provide a voting function of 2 out of 3. When equipped with this function, the alarm outputs from each module are compared and the two modules are consistent before the relay is driven.

133388-01 3500/53 Overspeed Detection Module

133396-01 Overspeed detection I/O module

288062-01 3500/53M Overspeed Detection Module

323133-01 Overspeed Detection I/O Module

Common models

3500/50-01-00-01(288062-02,133442-01)

3500/50-02-00-01

3500/50-03-00-01

3500/32 4-Channel Relay Module

The 3500/32 4-channel relay module is a full height module that can provide the output of four relays. Any number of 4-channel relay modules can be placed in any slot on the right side of the frame interface module. Each output of the 4-channel relay module can be independently programmed to execute the required voting logic.   

Each relay applied to a 4-channel relay module has an "alarm drive logic". The alarm drive logic can be programmed with "AND" and "OR" logic, and can use the alarm input (warning or danger) provided by any monitor channel or any combination of monitor channels in the frame. The alarm driven logic application framework configuration software programming can meet special needs in applications.   

Note: When triple module redundancy (TMR) is required, the 3500/34 TMR relay module should be used.  

Meaning of front panel LED:

OK LED: Flashes when the module is operating normally

TX/RX LED: used for transmission and reception, flashing when communication between this module and other modules in the frame is normal

CH ALARM LED: Flashes when the relay channel is in an alarm state

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。