STABYL EOS E 2是一种全合成润滑油,其增厚特殊锂皂。此外,是一种特别有力包的高压和抗磨添加剂的使用。这种组合提供了STABYL EOS E 2极宽的工作温度范围内结合高老化稳定性和EP不同的特性。
应用领域
STABYL EOS E 2是专为在重仓平原和滚各类风力发电厂轴承使用而开发的。由于其较宽的工作温度范围内,其高的机械稳定性和其强大的承重资产,所以特别适合用于转子轴承的润滑。
但是,即使在方位(塔大厦)和变桨轴承(间距)的苛刻的润滑点,使STABYL EOS E 2有价值的服务,甚至在这里达到了基于反应白色固体润滑剂成立今天特种油脂这些应用程序几乎表现。STABYL EOS E 2,因此可以很好地用作用于输入的应用程序,这简化了复杂的照顾这些润滑点的润滑剂。
应用
STABYL EOS E 2既可以用黄油,自动润滑分配器,以及在集中润滑系统进行处理。
属性
工作温度范围:-40 / +130°C
强大的承载能力
抗磨损保护
耐寒适应性
高稳定性老化
可靠的防腐蚀保护
高耐水性
STABYL EOS E 2 is a fully-synthetic high-performance grease, which is thickened with a special lithium-soap. Additionally, an outperforming package of Extreme Pressure and anti-wear additives are used. This combination provides STABYL EOS E 2 with an extremely wide working temperature range, accompanied by high ageing stability and outstanding EP properties.
STABYL EOS E 2 was specifically designed for use in heavily loaded roller and plain bearings of wind power plants. Due to its wide operating temperature range, its high mechanical stability and its outstanding load carrying capacity, STABYL EOS E 2 is excellently suitable for the lubrication of the main rotor bearings.
Moreover, it can also be used in the very demanding lubricating areas of the azimuth and the pitch bearings where its efficiency is valuable and almost equivalent to the performance of the special greases based on reactive white solid lubricants, which are nowadays well established in these applications. Therefore STABYL EOS E 2 is also excellently suitable as a single lubricant for all these applications, thus tremendously reducing the necessary efforts for a reliable grease supply in all these lubricating points.
STABYL EOS E 2 can be applied by means of grease guns, automatic grease dispensing units as well as in central lubricating systems.
very good protection against wear
high ageing resistance
temperature range for use: -40 / +130 °C
pronounced load carrying capacity
excellent low temperature properties
reliable protection against corrosion
high water resistance
购买须知:
1.请买家在购买前先用旺旺联系客服,确定购买的商品及型号,以及运费等,非本公司原因造成退换货的,本店恕不负责来回运费及其他费用。 |
2.请客户在签收前检查货物是否破损、渗漏,凡发货运期间有小小渗漏请谅解。 |
3.若签收前物件渗漏严重,请及时与本公司的工作人员进行联系,我们会及时的为您解决。 |
4.请在签收前确认收货人名字、电话以及单号,凡名字、电话以及单号不对的请勿签收,检查货物是否一致,并且与本公司工作人员联系;若签收,视为您对该件的认可,货物缺少和货物不符,帮您忙润滑油将不负责任何责任。 |
5.买家有权在签收前检查货物完整以及数量,只要已签收的货物就代表您对其质量、包装认可。在签收以后如发现破损、渗漏或货品不符、缺少,本公司将不承担任何责任;请各位买家签收后放置好商品,请勿倒置。 |
6.您购买我公司产品就视为您已接受上述条款.出现以上问题,本公司将不做任何解释! |
7.发货地址按照买家提供地址进行发货,请买家在购买时检查地址是否正确,货物到达地点后若由该地址。 |
价格说明