福斯CEPLATTYN SF30开式齿轮油

福斯CEPLATTYN SF 30可喷洒高粘度合成开式齿轮油 FUCHS CEPLATTYN SF 30

CEPLATTYN SF 30
可喷涂，的粘度开式齿轮润滑剂。 免溶剂和沥青。

产品描述
CEPLATTYN SF 30是一个非常高粘度的粘合剂润滑剂用于重负荷开式齿轮驱动器。
CEPLATTYN SF 30由合成油和特殊添加剂，以优化的抗磨损保护和润滑膜稳定性的新类型。

CEPLATTYN SF 30不包含任何形式的沥青和溶剂。

应用领域
粘度基础油，保证了稳定的润滑油膜之间的齿面接触，从而导致一个突出表现。
即使低量的润滑剂被使用，CEPLATTYN SF 30保证齿轮驱动器的可靠的运行条件，。
与传统的胶粘剂润滑油相比，大大节省可能的采用SF 30 CEPLATTYN时。
CEPLATTYN SF 30特别制定了极其暴露的重负荷开式齿轮驱动器高冲击载荷。
SF 30 CEPLATTYN根据开式齿轮驱动器AGMA标准符合要求。 CEPLATTYN SF 30是根据ANSI /：AGMA 9005-E02/D-2（原AGMA 13EP 13S）。

应用方法
通过喷雾系统CEPLATTYN SF 30。
为了达到足够的可喷涂性，一个额外的加热系统建议的润滑系统。

产品特点
温度范围：+15 / +120°C +60 / +250°F应用温度> +25°C / +77°F
优良的抗磨损保护
很好的润滑膜稳定性低消费
良好的环保性能
优异的附着力
保证大限度地提高设备的可用性

CEPLATTYN SF 30

Sprayable, extremely high-viscosity lubricant for Open Gears. Free of solvent and bitumen.

Description

CEPLATTYN SF 30 is an extremely high-viscosity adhesive lubricant for heavy-duty Open Gear drives.
CEPLATTYN SF 30 consists of new types of synthetic oils and special additives to optimise wear protection and lubricating film stability.

CEPLATTYN SF 30 does not contain any kind of bitumen and solvent.

Fields of application

The extremely high base oil viscosity guarantees a stable lubricant film between the tooth flanks being in contact, thus resulting in an outstanding performance.
Even if the lowest amount of lubricant is being used, CEPLATTYN SF 30 guarantees reliable running conditions of the gear drive.
Compared with conventional adhesive lubricants, considerable savings are possible when using CEPLATTYN SF 30. 
CEPLATTYN SF 30 is especially formulated for extremely heavy-duty Open Gear drives exposed to high shock loads.
CEPLATTYN SF 30 meets the demands according to the AGMA Standard for Open Gear drives. CEPLATTYN SF 30 is according to ANSI/AGMA 9005-E02/D-2 (formerly AGMA 13EP and 13S). CEPLATTYN SF 30 has been approved by CITIC, FLSmidth, KHD Humboldt Wedag, Metso and Outotec.

Method of application

CEPLATTYN SF 30 is applied via spray systems.
To achieve sufficient sprayability, an additional heating system is recommended for the lubrication system.

Features

• temperature range: +15 / +120 °C +60 / +250 °F application temperature > +25°C / > +77°F

• excellent protection against wear

• very good lubrication film stability at minimum consumption

• good EP properties

• excellent adhesion

• guarantees maximum equipment availability

• causes no solid deposits