美孚克特140切削液

Mobilcut 系列

水性金属加工液

产品简介

Mobilcut 是美孚水溶性金属切削液产品线的商标。 Mobilcut 系列无氯产品采用先进的基础油、添加物和乳化剂，为各种金属切削工艺提供可靠性能。 该产品设计成可在各类硬水和软水中运行，不易起泡，可长期抵抗机器和零件腐蚀。 Mobilcut 产品具有较低的维护频率和内在稳定性，旨在为以产品具备较长的使用寿命、的加工性能和健康环保问题为提高生产力的重要因素的现代化车间而设计。 这类产品以浓缩液形式提供，使用前需要与水混合。 

Mobilcut 100是一种传统的乳状可溶物，可与水混合形成稳定的乳化剂。 其通用性能使其广泛适用于一系列铁及非铁物质的金属切削和研磨操作，此类操作以经济性能作为主要考量。 

Mobilcut 140 是一种采用润滑剂增强的长效水性可溶液，是中型到重型负荷加工应用的理想选择。 其配方可提供较长的使用寿命并能防止细菌生长，同时，即便在困难的加工操作条件下，亦可有助于延长工具寿命并增加表面质量。 如果既要地用于一系列材料和应用，又要保持较长的使用寿命，那么 Mobilcut 140 是理想的选择。 

Mobilcut 210 是一种的半合成水溶性金属加工液，可在较大的水硬度范围内成透明乳化液。 其具有良好的清洁、冷却和切削特性，适用于轻型到重型负荷的切削和研磨应用。 Mobilcut 210 的配方特别适合铸铁的加工和研磨，同时有助于保持机器的清洁。


Mobilcut 230 是一种的半合成加工液，可在水中乳化形成稳定的微乳液。 该产品设计成广泛适用于各种水质并且，即便在高压系统中，亦可防止起泡。 Mobilcut 230 适用于一系列铁和非铁合金的应用，是合并金属加工液的理想选择。 相比传统可溶性油，在维护良好的情况下，Mobilcut 230 可延长冷却剂寿命，并维持高水准的加工性能。

Mobilcut 250 是一种的半合成加工液，为铝和和铝合金加工和需要尽可能降低加工件变色色的工艺增强性能而配制。 由于具有很高的润滑剂含量，该加工液还可提供的碳钢、合金钢和黄铜加工性能。
Mobilcut 320 是一种生物稳定、不含矿物油的金属加工液。 Mobilcut 320 旨在用于一般的研磨操作，此类操作中，高平面修饰、冷却和低起泡可能为主要要求。 该加工液将有助于保持砂轮的自由开放，便于其发挥其大性能，并可程度地抑制细菌感染，维持较长的使用寿命。

特征和潜在效益

Mobilcut 系列产品旨在透过提供特性以增强现代化车间的生产力。

特点优 点及潜在效益

应用范围

Mobilcut 100: 易于加工的钢材和铜合金的一般加工中，从轻型到中型负荷的加工操作有铣削、车削、锯削、钻孔、镗孔和铰孔。 

Mobilcut 140: 中型到重型负荷铝和易切削钢的加工操作有铣削、车削、锯削、镗孔、钻孔和铰孔，在此类操作中要求可溶性油具有润滑性。 

Mobilcut 210: 铁/非铁金属在集中化或个体机器中的加工。 油含量低，可提供额外的润湿性和抗腐蚀保护。 适用于铸铁加工和研磨。 

Mobilcut 230: 半合成切削液主要推荐用于加工钢材、易于加工的不锈钢和铸铁的铣削、车削、锯削、镗孔、钻孔和铰孔操作。 

Mobilcut 250: 半合成的切削液主要用于铝及铝合金的加工。 亦可用于一系列铁材料的加工，该类加工需要较为通用的加工液。 

Mobilcut 320: 合成（不含矿物油）研磨液、主要推荐用于钢材和铸铁的研磨。

典型特性

Mobilcut100140210230250320

健康与

根据现有资料显示，在本产品的使用过程中，不会对人体健康产生不良影响，但在使用过程中需遵循物料资料表 (MSDS) 上所提供的指引。有关物料资料表可向当地销售部门或上网获取。除指定的用途外，该产品不应用於其他用途。如需处理用过的产品，注意保护环境。

Mobilcut Series

Aqueous Metal Working Fluids

Product Description

Mobilcut is the trademark for ExxonMobil’s line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance and health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use. 

Mobilcut 100 is a conventional milky soluble that readily mixes with water to form stable emulsions. Its versatile performance makes it suitable for a wide range of metal cutting and grinding operations for both ferrous and non ferrous materials where economical performance is the main consideration. 

Mobilcut 140 is a long life water soluble fluid enhanced with lubricity agents making it an ideal choice for moderate to heavy duty machining applications. It is formulated to provide long service life and resist bacterial growth while helping to increase tool life and surface finish, even in difficult machining operations. Mobilcut 140 is an ideal choice where excellent machining performance is required for a wide variety of materials and applications while maintaining long service life. 

Mobilcut 210 is a high quality semi synthetic water miscible metalworking fluid designed to form a translucent emulsion over a wide water hardness range. It has good detergent, coolant and cutting properties, making it suitable for a light to moderate duty cutting and grinding applications. Mobilcut 210’s formulation makes it particularly suited to the machining and grinding of cast iron and while helping to maintain machine cleanliness. 

Mobilcut 230 is a high performance semi-synthetic fluid that readily emulsifies in water to form a stable micro-emulsion. The product is engineered to be suitable for a wide range of water qualities and is resistant to foaming, even in high pressure systems. Mobilcut 230 is suitable on a range of range of applications on both ferrous and non ferrous alloys making it an ideal choice when consolidating metal working fluids. Mobilcut 230 offers extended coolant life relative to conventional soluble oils when properly maintained while maintaining a high degree of machining performance. 

Mobilcut 250 is a high performance semi-synthetic fluid formulated to enhance performance when machining aluminum and aluminum alloys and where low staining potential is important. Containing high levels of lubricity agents, it also provides high machining performance of carbon and alloy steels and yellow metals.
Mobilcut 320 is a bio stable, mineral oil free metalworking fluid. Mobilcut 320 is designed for general grinding operations where high surface finish, cooling and low foaming potential are the primary requirements. It will help maintain free and open grinding wheels for maximum performance and is highly resistant to bacterial infection for a long service life .

Features and Benefits

The Mobilcut series of products are designed to help increase the productivity of modern machine shops by providing high performance features

FeaturesAdvantages and Potential Benefits

Applications

Mobilcut 100: General machining of easy to machine steels and copper alloys in light to moderate duty machining operations such as milling, turning, sawing, boring, drilling and reaming. 
Mobilcut 140: Machining of aluminum and high machinability steels in moderate to heavy duty operations such as milling, turning, sawing, boring, drilling and reaming where the lubricity of a soluble oil is desired. 
Mobilcut 210: Machining of ferrous/non ferrous metals in centralized or individual machines. Lower oil content for extra wettability and corrosion protection. Well suited for cast iron machining and grinding. 
Mobilcut 230: High performance, semi synthetic cutting fluid, primarily recommended for machining steels, easier to machine stainless steels, and cast iron in milling, tuning, sawing, boring, drilling and reaming. 
Mobilcut 250: Semi synthetic cutting fluid primarily intended for the machining of aluminum and aluminum alloys. It may also be used on a wide variety of ferrous materials where a more versatile fluid is required. 
Mobilcut 320: Synthetic (mineral oil-free) grinding fluid, primarily recommended for grinding of steels and cast iron.

Typical Properties

Mobilcut100140210230250320

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

  包 装：18L/208L  桶