产品目录 > 810深孔极压切削油（刮滚机切削油）产品名称：刮滚机切削油产品简介：810深孔极压切削油含有高渗透性润滑剂，降低摩擦阻力及操作负荷。延长刀模具的使用寿命，减少枪钻头磨损断裂。 810深孔极压切削油（刮削滚光机）的详细介绍DRK-810深孔枪钻切削油DRK-810 deep hole gun drilling cutting oil 本产品针对深孔枪钻加工的特点，采用国内先进配方，以合成油精制矿物油为基础，添加多种功能添加剂，用特殊生产工艺精制而成。This product for deep hole gun drill processing, using the domestic advanced formula, using synthetic oil refined mineral oil as base, adding a variety of functional additives, special production process and refined产品特性： 1.性好，对人和环境无不良影响。 2.优良的防锈性、润滑性和极压性，加工精度高。 3.本品含有高渗透性润滑剂，降低摩擦阻力及操作负荷。 4.延长刀模具的使用寿命，减少枪钻头磨损断裂。 5.粘度合适且长时间保持不变，挥发性小，稳定性高。 6.油品流动性好，排屑快，清洗性好。 7.油品抗气雾性能优良，油料消耗较少，使用成本较低。Products characteristics: ● good safety, no adverse effects on people and the environment. ● antirust, lubrication and extreme pressure, high precision machining.This product contains high permeability lubricant, reducing friction and the operating load. ● extend knife die life, reduce the gun drill wear fracture. ● suitable viscosity and long time constant, low volatility, high stability. ● oil has good fluidity, fast chip removal, cleaning and good.The excellent performance of anti fog oil, fuel consumption is less, the use of low cost。产品用途：适用于不锈钢、铝合金、碳钢、铸铁等各种材质工件的深孔枪钻、深孔镗的切削加工。 Product use: machining deep hole gun is applicable to stainless steel, aluminum alloy, steel, cast iron and other materials of drilling, deep hole boring of workpiece. 技术指标(qualification ):注意事项：密封储存，防止日晒、雨淋或混入杂质，严禁与其他油品混用。包装及储运：200升国标桶包装，净重170公斤/桶。Note: sealed storage, to prevent the sun, rain or impurities, is strictly prohibited and other oil mixture.Packing and storage: 200 liters GB drum, net weight 170 kg / barrel..   |
豫公安备 41010502000017号