2系列铝合金技术表_上海儒盟文实业有限公司

品牌：西南铝/美铝Alcoa	规格：	材质：2024/2A12
产地：国产/进口

2XXX series alloys contain copper as the main alloying element, often in combination with magnesium and silicon.

Strength:

Strength is developed through solution treatment and natural ageing (T351, T451) or artificial age hardening (T651, T851). Strength levels in the naturally aged alloys may be further increased by artificial ageing, but this reduces fatigue properties and toughness.

Welding:

With the exception of a few specialised alloys the 2XXX series alloys are not generally weldable by fusion welding.

Corrosion:

2XXX alloys are susceptible to corrosion and may be require protective surface treatments such as anodising or painting.
2XXX alloys are generally used where good levels of strength and toughness are required. The most widely used alloys in this series are 2014A, 2017A and 2024.

Applications include:

Machined parts
Truck wheels
Load cells

2xxx series alloys technical data

STANDARD DIMENSIONAL AVAILABILITY
	Alcoa Europe only supply plate that exceeds the requirements issued by the major specifying authorities e.g. European Standards (a summary of the main requirements of EN485 is available on request). 2014/2014A, 2017A AND 2024 2014 and 2014A are commonly supplied in the T651 temper, offering a higher level of strength than 6XXX, and good toughness. Alcoa can also supply 2014/2014A in O condition, which gives good formability and permits further strengthening by means of heat treatment. 2017A and 2024 are characterised by high levels of strength and toughness, allied to good fatigue properties. Because they develop good levels of strength through natural ageing they are usually supplied in the T451 and T351 conditions respectively. Strength in 2024 can be further increased by means of artificially ageing, but this is achieved at the expense of fatigue properties and toughness. Fatigue resistance is higher in 2024 T351 compared to 2017A T451. These alloys are often selected when fatigue is an important consideration and are widely used for other engineering applications.
FORMABILITY
	Radii expressed as thickness (t) are minimum recommended for bending plates in a standard press brake with air bend dies. Minimum permissible radii will also vary with design and condition of tooling. Forming over smaller radii is possible immediately after solution heat treatment and quenching.

Advice and further details on Alcoa's specialised alloys is available on request.

TYPICAL PHYSICAL PROPERTIES

2系列 铝合金 技术表

上海儒盟文实业有限公司

2系列铝合金技术表