柳州TRICONEX7400028-100

ZhongHaiDe (Fujian) Industrial Equipment Co., established in 2014 in Fuzhou, is a leading equipment supplier in the field of automation in China.

Our company distributes globally renowned brand industrial automation products mainly from Europe, the United States, Japan and other developed countries,such as ABB, Foxboro, Yaskawa, Sew and so on.

Among all these companies, Yaskawa as a world class Transmission Product Manufacturers from Japan, which has a history more than 100 years. It provide a lot kinds of products, such as inverters, servo drives, controllers and robots. It can provides our customers a lot of choices.

With professional and first-class technology and business team, our company provides customers with high quality products and perfect after-sales service. And we he formed a mature model for service of system users. It has realized the humanization of services, the simplification of processes and the standardization of management, effectively helping customers extend the life cycle of electrical equipment and reduce Operating costs, control the risk of stop production, increase production efficiency!

Our products are reliable and cost-effective, if you want to know more about our products, just click here: http://www.zhdfj.com/. or: fjzhdcm@outlook.com or ayj897463393@gmail.com. also you can add wechat :13376990653. QQ:3004650323  We’re looking forward to your visit.

三菱 QCPU PID
三菱 QCPU SFC
三菱 QCPU EMC
三菱 QCPU
三菱 QCPU
三菱 QCPU MELSAP-L
三菱 QJCPU-E
三菱 QJCPU-E
三菱 QJCPU-E EMC
三菱 QJCPU-E MELSAP-L
三菱 QJCPU-SET
三菱 QJCPU-E SFC
三菱 QJCPU-S-SET SFC
三菱 QJCPU-S-SET EMC
三菱 QJCPU-S MELSAP-L
三菱 QJCPU-S
三菱 QJCPU-S SFC
三菱 QJCPU-SET PID
三菱 QJCPU-SET MELSAP-L
三菱 QJCPU-SET
三菱 QJCPU-SET EMC
三菱 QJCPU-SET SFC
三菱 QJCPU
三菱 QJCPU
三菱 QCPU-A MELSAP-L
三菱 QCPU-A
三菱 QUCPU
三菱 QUCPU SFC
三菱 QUCPU
三菱 QCPU-A
三菱 QCPU-A SFC
三菱 QCPU-A
三菱 QCPU-A EMC
三菱 QUDCPU
三菱 QUDCPU
三菱 QUDCPU PID
三菱 QUDCPU
三菱 QUDEHCPU SFC
三菱 QUDEHCPU EMC
三菱 QUDEHCPU PID
三菱 QCCPU-V-B
三菱 QCCPU-V-B SFC
三菱 QCCPU-V-B
三菱 QAD
三菱 QAD
三菱 QADH
三菱 QAD-GH
三菱 QAD-GH EMC
三菱 QADDA
三菱 QADDA
三菱 QADDA EMC
三菱 QP EMC
三菱 QHLC
三菱 QHLC EMC
三菱 QDAN
三菱 QDAN EMC下面以喷雾干燥器为实例，结合制药工艺实际和GMP要求，谈谈制药行业对喷雾干燥器的要求。制药行业对喷雾干燥器的要求1)雾化装置喷雾干燥器的雾化装置一般有离心式、压力式以及气流式。离心式雾化器其离心盘的传动轴部分处干燥室内外，防止轴封之细粒脱落比较困难;压力式雾化系统其料液要经过高压泵压送，运作时活塞与缸体的磨擦及连杆的密封都会影响料液之洁净。比较之下，气流雾化因雾化用的空气以及料液在进塔之前均可先经洁净过滤，滤除其所夹带之颗粒（包括细菌），故而比较适宜药品行业的干燥。料液及雾化用压缩空气的过滤喷干前的料液在引入喷塔之前应经.3m的微孔膜过滤，同时雾化用压缩空气在经微孔膜过滤之前还应将其所夹带之油、水先行去除。热空气热空气源自大气，所夹带尘粒等的数量较多，而且流量大，加热后温度要求达到14℃以上，加热器在运转中会剥落颗粒。为此，热空气过滤系统应按照热空气温度要求来考虑，开发出能耐温耐久长期运转的空气过滤器。干燥产品的送出在干品的排出口周围要用洁净空气保护，以防周围环境的尘埃或杂物混入干燥产品。