PN-PAC剥离试验架

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com  www.gelaimo.com

http://www.glmgs.com/prodxx.asp?id=814

一、产品简介
　　本仪器是测定瓦楞纸板粘合强度(PAT试验) 时的试验器具。试验架由下插针架(各楞型通用)、上插针架(A、B、C楞各1件)和上下插针组成，具有操作方便，无需调节，适用性强等特点，可广泛适用于瓦楞纸板(箱)生产、科研和产品质量监督检验等部门进行瓦楞纸板单剥离试验。本仪器参数、功能符合下列国家标准：GB/T 2679.8-1995《纸和纸板环压强度的测定》；GB/T 6546-1998《瓦楞纸板边压强度的测定》；GB/T 6548-1998《瓦楞纸板粘合强度的测定》；GB/T 2679.6-1996《瓦楞原纸平压强度的测定》
二、技术指标
    ★插针直径：φ3mm　(A楞型)、φ2mm　(B、C楞型)。
    ★插针轴线对底面平行度误差：                  
    ★装试样后大外形尺寸(长×宽×高，mm)：100×50×45。  　


一、产品简介
One, product introduction
　　本仪器是测定瓦楞纸板粘合强度(PAT试验) 时的试验器具。试验架由下插针架(各楞型通用)、上插针架(A、B、C楞各1件)和上下插针组成，具有操作方便，无需调节，适用性强等特点，可广泛适用于瓦楞纸板(箱)生产、科研和产品质量监督检验等部门进行瓦楞纸板单剥离试验。本仪器参数、功能符合下列国家标准：GB/T 2679.8-1995《纸和纸板环压强度的测定》；GB/T 6546-1998《瓦楞纸板边压强度的测定》；GB/T 6548-1998《瓦楞纸板粘合强度的测定》；GB/T 2679.6-1996《瓦楞原纸平压强度的测定》
This instrument is the determination of adhesive strength of corrugated cardboard ( PAT test) must have special test apparatus. Test rack by a pin frame ( under each arris needle holder ( general ), A, B, C corrugated 1 pieces ) and the upper and lower pin component, has the advantages of convenient operation, without the need for regulation, wide adaptability, and can be widely applied to corrugated cardboard ( box ) production, scientific research and product quality supervision and inspection department of corrugated cardboard sheet peeling test. The instrumental parameters, functions in accordance with the following national standards: GB/T 2679.8-1995 " paper and board - Determination of ring crush strength "; " GB/T 6546-1998 corrugated fibreboard - Determination of edgewise crush resistance "; " GB/T 6548-1998 corrugated paper board for the determination of bond strength of " GB/T 2679.6-1996 "; Corrugating medium determination of flat crush resistance "
二、技术指标
Two, technical indicators
★插针直径：φ3mm　(A楞型)、φ2mm　(B、C楞型)。
★pin diameter:φ 3mm ( A type ),φ 2mm ( B, C type ).
★插针轴线对底面平行度误差：                  
Pin on the bottom surface of the axis parallelism error:
★装试样后大外形尺寸(长×宽×高，mm)：100×50×45。
★mounted specimen maximum dimension ( length * width * height, mm ) :100 × 50× 45.