ZQS6-2000A粘结强度检测仪

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com  www.gelaimo.com

http://www.glmgs.com/prodxx.asp?id=948

一、产品简介
    该产品依行业标准《外墙饰面砖工程施工及验收规程》设计，可连续均匀加荷，手动泵与千斤顶连为一体，结构紧凑，经久，采用液晶显示粘结力值，自动准确的记录粘结力值并给予峰值保持，该产品采用镍-氢充电电池，小巧轻便，总重约3千克，便于现场携带和使用，完全符合《建筑工程饰面砖粘结强度检验标准JGJ110-97的要求，使用标准块的规格为95mm×45mm×8mm和40mm×40mm×8mm，保温材料标准试块的规格为100mm×100mm×8mm，在满足合格要求时的小拉力为0.64kN，大拉力为2.56kN，针对饰面砖粘结强度低和粘结力小的特点，专将大拉力设计6.00kN，以确保仪器的检测精度。ZQS6-2000A型饰面砖粘结强度检测仪是原有体积大、结构繁杂、操作不便型检测仪的理想替代产品，该检测仪已在许多施工单位、工程质量检测站（中心）、试验室、科研院所及监理单位等得到广泛应用，深受广大工程技术人员的欢迎。
二、技术指标
    ★：0.001kN
    ★测量范围：0～6.000kN
    ★加压装置：有           
    ★峰值保持：有
三、产品特点
    ★：小可测得0.001kN的力值； 智能背光技术,即使在暗处检测,也清晰可见
    ★大容量，该检测仪大可存储带编号的1２00个测量值（测点编号自动生成）
    ★大屏幕液晶显示，全中文菜单，四行汉化功能显示，可实现检测数据的保持＼存储＼查询（上下翻滚查询）＼删除
    ★RS232接口,软件功能强大,可将检测数据传输至计算机,智能统计大值小值平均值合格率,自动生成标准检测报告
细分标定技术，使检测精度更高＼数值更稳＼操作更简单
    ★率：该检测仪的加压方式与传统的加压方式相比，加压速度可提高近10倍,减轻因加压结构不妥而带来的检测疲劳；   
    ★采用镍-氢充电电池和智能提示充电系统，实现电源供给的智能化


一、产品简介
One, product introduction
该产品依行业标准《外墙饰面砖工程施工及验收规程》设计，可连续均匀加荷，手动泵与千斤顶连为一体，结构紧凑，经久，采用液晶显示粘结力值，自动准确的记录粘结力值并给予峰值保持，该产品采用镍-氢充电电池，小巧轻便，总重约3千克，便于现场携带和使用，完全符合《建筑工程饰面砖粘结强度检验标准JGJ110-97的要求，使用标准块的规格为95mm×45mm×8mm和40mm×40mm×8mm，保温材料标准试块的规格为100mm×100mm×8mm，在满足合格要求时的小拉力为0.64kN，大拉力为2.56kN，针对饰面砖粘结强度低和粘结力小的特点，专将大拉力设计6.00kN，以确保仪器的检测精度。ZQS6-2000A型饰面砖粘结强度检测仪是原有体积大、结构繁杂、操作不便型检测仪的理想替代产品，该检测仪已在许多施工单位、工程质量检测站（中心）、试验室、科研院所及监理单位等得到广泛应用，深受广大工程技术人员的欢迎。
The product in accordance with the " outer brick industry standard specification for construction and acceptance of " design, can be continuously and uniformly loading, a manual pump and special jack are connected as a whole, compact structure, durable, using liquid crystal display bonding force value, automatic and accurate record of bonding force value and to maintain peak, this product adopts the high performance nickel - hydrogen rechargeable batteries, compact and lightweight, weighing about 3 kg, convenient for field and use, fully in line with the " adhesive strength of tapestry brick of construction inspection standard of JGJ110-97, using a standard block of the specifications for the 95mm× 45mm× 8mm and 40mm× 40mm× 8mm, insulation materials standard test block size is 100mm× 100mm× 8mm, to meet the eligibility requirements of minimum tension of 0.64kN, maximum tensile force is 2.56kN, for adhesive strength of tapestry brick and low adhesive force of small features, specifically the maximum tension design 6.00kN, to ensure the accuracy of detection instrument. Type ZQS6-2000A facing brick adhesive strength detecting instrument is the original large volume, complicated structure, inconvenient operation type detector for ideal substitute products, the detector in the country has many construction units, engineering quality inspection station ( Center ), laboratories, research institutes and the supervision units to be used, by the majority of engineering and technical personnel welcome.
二、技术指标
Two, technical indicators
★：0.001kN
★ high accuracy: 0.001kN
★测量范围：0～6.000kN
★measuring range: 0～ 6.000kN
★加压装置：有           
★high pressure device:
★峰值保持：有
★peak hold:
三、产品特点
Three, product characteristics
★：小可测得0.001kN的力值； 智能背光技术,即使在暗处检测,也清晰可见
★ high precision: the minimum 0.001kN measured force value; intelligent backlight technology, even in the shadows detection, are also clearly visible
★大容量，该检测仪大可存储带编号的1２00个测量值（测点编号自动生成）
Of large capacity, the detector can be stored with number 1200 measured values ( measuring point number automatically generated )
★大屏幕液晶显示，全中文菜单，四行汉化功能显示，可实现检测数据的保持＼存储＼查询（上下翻滚查询）＼删除
★large-screen LCD display, full Chinese menu, four lines of Chinese display function, can realize the detection data maintain storage query ( rolling up and down delete query )
★RS232接口,软件功能强大,可将检测数据传输至计算机,智能统计大值小值平均值合格率,自动生成标准检测报告
★ RS232 interface, powerful software, but transmits detection data to the computer, intelligent statistics maximum, minimum, average, qualified rate, automatic generation of Standard Test Report
细分标定技术，使检测精度更高＼数值更稳＼操作更简单
The first subsection calibration technology, the detection precision is higher, more stable, more simple operation value
★率：该检测仪的加压方式与传统的加压方式相比，加压速度可提高近10倍,减轻因加压结构不妥而带来的检测疲劳；   
★high efficiency: the detector pressurizing mode with traditional compression methods, compression rate can be increased by nearly 10 times, completely relieve pressure structure with the detection of fatigue;
★采用镍-氢充电电池和智能提示充电系统，实现电源供给的智能化
★ using high performance nickel hydrogen battery and intelligent charging system, realizing the intelligent power supply