HVS-50Z自动转塔数显维氏硬度计

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=628

一、产品简介
    HVS-50Z型自动转塔数显维氏硬度计是光机电一体化的高新技术产品，它具有在测试时压头与物镜自动切换，测试点自动定位。有良好的可靠性，可操作性，是小负荷维氏硬度计的升级换代产品。该机采用计算机软件编程，高倍率光学测量系统，光电传感等技术，通过软键输入，能调节测量光源的强弱，选择测试方法与硬度对照表、保持时间，文件号与储存等，在LCD大屏幕显示屏上能显示试验方法、试验力，测量压痕长度、硬度值、试验力保持时间，测量次数，并能键入年、月、日期，试验结果和数据处理等，通过打印机输出，RS232接口与计算机连网。硬度计适用于测量微小、薄形试件、表面渗镀层处理后的零件，是科研机构、工厂及质检部门进行研究和检测的理想的硬度测试仪器。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属，微小及薄形零件等。
二、技术指标
    ★试验力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
    ★转换标尺：洛氏、表面洛氏、布氏
    ★小测量单位：0.025μm
    ★总放大倍数：100X（观察）200X（测量）
    ★数据输出：内置打印机和RS-232接口
    ★加荷控制：自动（加荷、保荷、卸荷）
    ★仪器重量：35kg
    ★试件大高度：160mm
    ★电源：AC220V±5%，50~60Hz
    ★执行标准：国家标准(GB/T4340.2 Chinese Standard), JJG151检定规程 
    ★标准配件 附件：物镜20x、10x，维氏压头，数显测量目镜10x，大平试台、中平试台、V型试台、硬度块 (2)，电源线等



一、产品简介
One, product introduction
HVS-50Z型自动转塔数显维氏硬度计是光机电一体化的高新技术产品，它具有在测试时压头与物镜自动切换，测试点自动定位。有良好的可靠性，可操作性，是小负荷维氏硬度计的升级换代产品。该机采用计算机软件编程，高倍率光学测量系统，光电传感等技术，通过软键输入，能调节测量光源的强弱，选择测试方法与硬度对照表、保持时间，文件号与储存等，在LCD大屏幕显示屏上能显示试验方法、试验力，测量压痕长度、硬度值、试验力保持时间，测量次数，并能键入年、月、日期，试验结果和数据处理等，通过打印机输出，RS232接口与计算机连网。硬度计适用于测量微小、薄形试件、表面渗镀层处理后的零件，是科研机构、工厂及质检部门进行研究和检测的理想的硬度测试仪器。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属，微小及薄形零件等。
HVS-50Z type automatic turret digital Vivtorinox hardness is light mechanical and electrical integration of high-tech products, it has in the test head and the objective lens automatic switching, test point automatic positioning precision. Have good reliability, operability, is a small load Vivtorinox hardness of the upgrading of products. The machine adopts computer software programming, high power optical measurement system, a photoelectric sensing technology, through the soft key input, can adjust the measuring light intensity, select the test method and hardness control table, holding time, file, and store, in LCD large screen display screen capable of displaying test method, test, measurement of indentation length, hardness, test force dwell time, measuring the number of times, and can enter the year, month, date, test result and data processing, output through the printer, the RS232 interface and computer networking. The hardness tester is applicable to measure small, thin specimen, the surface coating after parts, is the scientific research institutions, factories and quality inspection departments to conduct research and detection of the desired hardness testing instrument. Scope of application: heat treatment, carbide, hardening, surface coating, steel, non-ferrous metal, micro and thin shaped components.
二、技术指标
Two, technical indicators
★试验力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
★test: 9.8N ( 1.0Kgf ), 49.0N ( 5.0Kgf ), 98.0N ( 10Kgf ), 196N ( 20Kgf ), 294N ( 30Kgf ), 490N ( 50Kgf )
★转换标尺：洛氏、表面洛氏、布氏
★conversion ruler: Rockwell, surface Rockwell, Vickers
★小测量单位：0.025μm
The smallest unit of measurement: 0.025 μ M
★总放大倍数：100X（观察）200X（测量）
Of the total magnification: 100X ( observation) 200X ( measurement )
★数据输出：内置打印机和RS-232接口
★data output: built-in printer and RS-232 interface
★加荷控制：自动（加荷、保荷、卸荷）
★loading control: automatic ( loading, and loading, unloading )
★仪器重量：35kg
★the weight of the instrument: 35kg
★试件大高度：160mm
★specimen maximum height: 160mm
★电源：AC220V±5%，50~60Hz
★power: AC220V ± 5%, 50~60Hz
★执行标准：国家标准(GB/T4340.2 Chinese Standard), JJG151检定规程 
In the implementation of the standards: national standards ( GB/T4340.2 Chinese Standard ), JJG151 verification regulation
★标准配件 附件：物镜20x、10x，维氏压头，数显测量目镜10x，大平试台、中平试台、V型试台、硬度块 (2)，电源线等
★standard accessories: Objective 20x, 10x, Vivtorinox head, digital display measuring eyepiece 10x, flat bench, bench, in V type test, hardness test block ( 2), power line and so on一、产品简介
One, product introduction
HVS-50Z型自动转塔数显维氏硬度计是光机电一体化的高新技术产品，它具有在测试时压头与物镜自动切换，测试点自动定位。有良好的可靠性，可操作性，是小负荷维氏硬度计的升级换代产品。该机采用计算机软件编程，高倍率光学测量系统，光电传感等技术，通过软键输入，能调节测量光源的强弱，选择测试方法与硬度对照表、保持时间，文件号与储存等，在LCD大屏幕显示屏上能显示试验方法、试验力，测量压痕长度、硬度值、试验力保持时间，测量次数，并能键入年、月、日期，试验结果和数据处理等，通过打印机输出，RS232接口与计算机连网。硬度计适用于测量微小、薄形试件、表面渗镀层处理后的零件，是科研机构、工厂及质检部门进行研究和检测的理想的硬度测试仪器。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属，微小及薄形零件等。
HVS-50Z type automatic turret digital Vivtorinox hardness is light mechanical and electrical integration of high-tech products, it has in the test head and the objective lens automatic switching, test point automatic positioning precision. Have good reliability, operability, is a small load Vivtorinox hardness of the upgrading of products. The machine adopts computer software programming, high power optical measurement system, a photoelectric sensing technology, through the soft key input, can adjust the measuring light intensity, select the test method and hardness control table, holding time, file, and store, in LCD large screen display screen capable of displaying test method, test, measurement of indentation length, hardness, test force dwell time, measuring the number of times, and can enter the year, month, date, test result and data processing, output through the printer, the RS232 interface and computer networking. The hardness tester is applicable to measure small, thin specimen, the surface coating after parts, is the scientific research institutions, factories and quality inspection departments to conduct research and detection of the desired hardness testing instrument. Scope of application: heat treatment, carbide, hardening, surface coating, steel, non-ferrous metal, micro and thin shaped components.
二、技术指标
Two, technical indicators
★试验力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
★test: 9.8N ( 1.0Kgf ), 49.0N ( 5.0Kgf ), 98.0N ( 10Kgf ), 196N ( 20Kgf ), 294N ( 30Kgf ), 490N ( 50Kgf )
★转换标尺：洛氏、表面洛氏、布氏
★conversion ruler: Rockwell, surface Rockwell, Vickers
★小测量单位：0.025μm
The smallest unit of measurement: 0.025 μ M
★总放大倍数：100X（观察）200X（测量）
Of the total magnification: 100X ( observation) 200X ( measurement )
★数据输出：内置打印机和RS-232接口
★data output: built-in printer and RS-232 interface
★加荷控制：自动（加荷、保荷、卸荷）
★loading control: automatic ( loading, and loading, unloading )
★仪器重量：35kg
★the weight of the instrument: 35kg
★试件大高度：160mm
★specimen maximum height: 160mm
★电源：AC220V±5%，50~60Hz
★power: AC220V ± 5%, 50~60Hz
★执行标准：国家标准(GB/T4340.2 Chinese Standard), JJG151检定规程 
In the implementation of the standards: national standards ( GB/T4340.2 Chinese Standard ), JJG151 verification regulation
★标准配件 附件：物镜20x、10x，维氏压头，数显测量目镜10x，大平试台、中平试台、V型试台、硬度块 (2)，电源线等
★standard accessories: Objective 20x, 10x, Vivtorinox head, digital display measuring eyepiece 10x, flat bench, bench, in V type test, hardness test block ( 2), power line and so on