HBE-3000A电子布氏硬度计

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=605

一、产品简介
    HBE-3000A电子布氏硬度计适用于测定黑色金属、有色金属的布氏硬度。本机采用闭环式传感器加载、电子控制系统，具备10级的试验力。本机具有精度高、高重复性和稳定性，操作简便等特点。适用范围：布氏硬度采用的试验力大，压痕直经也大，适合具有大晶粒金属材料的硬度测试，如: 铸铁，有色金属及合金，各种退火、调质处理后的钢材，特别是对于较软的金属，如纯铝、铅、锡等。
二、技术指标
    ★布氏标尺：HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/750、 HBW10/100、 HBW10/250、  HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
    ★试验力：62.5kgf(612.9N)、100kgf (980.7N)、125kgf (1226N)、187.5kgf (1839N)、250kgf 250kgf (2452N)、500kgf (4903N)、750kgf (7355N)、1000kgf (8907N)、1500kgf 1500kgf (14710N)、3000kgf (29420N)
    ★小测量单位：0.005mm
    ★总放大倍数：20X
    ★保荷时间：5~60S
    ★仪器尺寸(长×宽×高)：550×210×750mm
    ★主机重量：；约125kg
    ★试件大高度：230mm
    ★电源：AC220V±5%，50~60Hz
    ★执行标准：GB/T231.2国家标准；JJG150检定规程
    ★标准配件 附件：测量显微镜一套、直经2.5、5、10mm硬质合金球压头、标准硬度块（2）、，大平试台、中平试台、“V”型试台、电源线

One, product introduction
HBE-3000A electronic Brinell hardness tester is applicable to determination of ferrous metal, non-ferrous metal Brinell hardness. This machine adopts closed loop sensor loading, electronic control system, with 10 level of test force. This machine has high accuracy, high repeatability and stability, simple operation and other characteristics. Scope of application: Brinell hardness test indentation by force, straight is large, suit with large grain hardness test, such as: cast iron, non-ferrous metals and alloys, various annealing, hardening and tempering steel, especially for soft metal, such as aluminum, lead, tin and other.
Two, technical indicators
★Brinell scale: HBW2.5/62.5, HBW2.5/187.5, HBW5/125, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000
★test: 62.5kgf ( 612.9N ), 100kgf ( 980.7N ), 125kgf ( 1226N ), 187.5kgf ( 1839N ), 250kgf 250kgf ( 2452N ), 500kgf ( 4903N ), 750kgf ( 7355N ), 1000kgf ( 8907N ), 1500kgf 1500kgf ( 14710N ), 3000kgf ( 29420N )
The smallest unit of measurement: 0.005mm
Of the total magnification: 20X
★dwell time: 5~60S
★instrument dimensions ( length * width * height ) :550 × 210× 750mm
★host weight:; John 125kg
★specimen maximum height: 230mm
★power: AC220V ± 5%, 50~60Hz
★executive standard: GB/T231.2 JJG150 national standards; verification regulation
★standard accessories: measuring microscope set, straight after 2.5, 5, 10mm hard alloy ball indenter, standard hardness block ( 2), a large, flat bench, bench, in " V " type test bench, power line