TH110里氏硬度计

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=1402

一、产品简介
    ★已安装的机械或性组装部件。
    ★模具型腔。
    ★重型工件。
    ★压力容器、汽轮发电机组及其设备的失效分析。
    ★测量空间很狭小的工件。
    ★轴承及其它零件。
    ★金属材料仓库的材料区分。
    ★大型工件大范围内多处测量部位的快速检验。
二、技术指标
    ★测试范围：170-960HLD
    ★误  差：示值误差小于±6HLD（HLD=760±30时），重复性误差小于6HLD（HLD=760±30时）
    ★工作温度：0℃-40℃
    ★工作电压：4.7V-6V
    ★电  池：镍氢电池组（充电时间约4小时）
    ★重  量：约0.615㎏(标准配置：主机+D型冲击装置)
    ★外形尺寸：235×90×47（mm）
三、产品特点
    ★可实现6种硬度（HL、HRB、HRC、HB、HV、HS）间的相互转换及与抗拉强度间的相互转换
    ★主机可配备7种冲击装置使用，更换时不需重新校准，自动识别冲击装置类型
    ★可以显示测量值、平均值、日期、冲击方向、测量次数、测试材料、硬度值等信息
    ★有充电指示及低压报警功能
    ★具有示值软校准功能
四、基本配置
    ★主机（含打印机）1台；
    ★D型冲击装置1支
    ★小支撑环1只；
    ★尼龙刷1只；
    ★高值标准里氏硬度块1块；
    ★充电器1只；
    ★打印纸1卷

One, product introduction
★installed machinery or permanent assembly parts.
★the mold cavity.
★heavy workpiece.
Of pressure vessel, steam turbine generator unit and its equipment failure analysis.
Measurement of the workpiece is very narrow.
★bearing and other parts.
★metal materials warehouse material to distinguish.
★large workpiece in a large range of multiple measuring site rapid detection.
Two, technical indicators
★test range: 170-960HLD
★error: error less than± 6HLD ( HLD=760 ± 30 ), repeatability error is less than 6HLD ( HLD=760 ± 30 )
★working temperature: 0 ℃ -40 ℃
Working voltage: 4.7V-6V.
★battery NiMH batteries ( charge time: about 4 hours )
★weight : about 0.615 kg ( standard configuration: host +D impact device )
★dimensions: 235 x 90 x 47 ( mm )
Three, product characteristics
★can realize 6 kinds of hardness ( HL, HRB, HRC, HB, HV, HS ) between the conversion and the conversion between the tensile strength
★host can be equipped with 7 kinds of impact device use, replacement without recalibration, automatic identification device for impact type
★can display the measured value, average value, date, the direction of impact, the number of measurements, materials testing, hardness and other information
★charging indication and low voltage alarm function
★indication soft calibration function
Four, the basic configuration
★host ( including printer) 1;
★D impact device 1
★small supporting ring 1;
★nylon brush 1;
High values of Rockwell hardness standard block 1 block;
★charger 1;
★printing paper 1