MCW-2000B（涡流）涂层测厚仪

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=1783

一、产品简介
    该仪器是高新技术的结晶,它采用单片机技术，精度高、数字显示、示值稳定、功耗低、操作简单方便、无校正旋钮、单探头全量程测量、体积小、重量轻；且具有存储、读出、低电压指示、其性能达到当代国际同类仪器的先进水平。 
应用范围： 
    该仪器是一种小型仪器,采用涡电流测量原理,可以方便无损地测量有色金属基体上的油漆、塑料、橡胶等涂层，或者是铝基体上的阳极氧化膜厚度等。该仪器广泛应用于机械、汽车、造船、石油、化工、电镀、喷塑、搪瓷、塑料等行业。
二、技术指标
    ★测量范围：0～1200um
    ★测量误差：<3%±1um
    ★小示值：1um
    ★显示方式：4位液晶数字显示
    ★电源：两节1.5v电池
    ★功耗：大功耗100mw
    ★外形尽寸：51mm*126mm*27mm
    ★重量：160g（含电池）
    ★使用环境温度：0℃～+40℃  相对湿度：不大于90%
    ★基体小厚度：0.5mm
    ★基体小平面的直径：7mm
    ★小曲率半径：凸:1.5mm；凹:6mm
    ★欠电压指示：右上角显示＂＂
    ★临界厚度小：工件铁基厚度大于1mm时,其涂（镀）层厚度的测量不受铁基厚度影响。
三、主要功能
    ★测量：单探头全量程测厚
    ★存储、删除：可存入测量数据600个，对测量中的单个可疑数据进行删除，也可以删除存储区内的所有数据。
    ★读：读出已存入的测量数据
    ★统计：设有三个统计量，平均值大值小值
    ★校准：可进行零点校准、两点校准及系统校准
    ★电量：具有欠压显示功能
    ★打印：可打印测量值，选配微型打印机
    ★关机：具有自动关机和手动关机两种方法
四、配置清单
    ★MCW-2000B型（涡流）涂层测厚仪主机，一台
    ★七号电池，两节
    ★探头，一只
    ★标准样片、铝基，一套
    ★说明书、保修卡，一份
    ★手提箱，一个
    选配件：                                                                
    ★打印机及通讯打印连线，1套   
    ★微机通讯软件，1盘

One, product introduction
The apparatus is the result of high and new technology, it uses single chip technology, high precision, digital display, showing the value of stable, low power consumption, simple and convenient operation, no correction knob, a single probe full range measurement, small size, light weight; and have memory, reading, low voltage, and its performance similar to the contemporary international instruments advanced level.
Range of application:
The apparatus is a small instrument, using eddy current measurement principle, can be convenient and nondestructive measurement of nonferrous metal base paint, plastic, rubber, coating, or aluminum anodic oxidation film thickness. The apparatus is widely used in machinery, automobile, shipbuilding, petroleum, chemical, electroplating, spray, enamel, plastic and other industries.
Two, technical indicators
★measuring range: 0～ 1200um
★measurement error: <3% ±1um
★minimum registranion value: 1um
★display mode: 4 LCD digital display
★power: two 1.5V batteries
Maximum power consumption of power: 100MW
★shape size: 51mm*126mm*27mm
★weight: 160g ( including battery)
★use environment temperature: 0 ℃~ +40 ℃relative humidity: not more than 90%
Minimum thickness of base: 0.5mm
★matrix minimum plane diameter: 7mm
★ the minimum radius of curvature of convex concave::: 1.5mm; 6mm
★an undervoltage indication: the upper right corner " "
★critical thickness of workpiece thickness greater than 1mm small: iron, its coated ( plating ) layer thickness measurement by iron-based thickness effect.
In three, the main function
★measurement: a single probe full range of thickness
★storage, delete: may be deposited in the measurement data of 600, on the measurement in single suspicious data delete, can also delete all data within the storage area.
★reading: read stored data
★statistics: with three statistics, the average minimum and maximum values
★calibration: can be zero calibration, a two-point calibration and system calibration
★n: has under-voltage display function
★print : print measurement, matching the micro printer
★shutdown: shutdown is automatic and manual shutdown of two methods
Four, configuration list
★MCW-2000B ( vortex ) coating thickness tester host, a
★No. seven batteries, two
★probe, a
★standard samples, aluminum base, a set of
★instruction manual, warranty card, a
In the suitcase, a
Optional accessories:
Printer and print line, 1 sets
★computer communications software, 1 disc