HCC-25电涡流式测厚仪

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=1605

一、产品简介
　　该产品是以电涡流方法工作的涂层厚度测量仪，仪器的设计符合以下标准：ISO2360和GB4957。同本公司另一产品HCC-24涂层测厚仪不同的是本产品适用于非导磁金属基体上非导电覆盖层厚度的测量，例如：测量铝的阳极氧化层以及铝、铜、锌等材料表面上油漆、喷塑和橡胶覆盖层的厚度，在航空、建材、轻工、机械、仪表、化工等行业已得到广泛的应用。本仪器是一种智能化仪器。由于先进的耐磨导套式测量探头和单片微机的应用，使它具有更多显著的特点，如测量误差小、可靠性高、稳定性好、操作简便、体积小巧、数据处理功能强等，是控制和的检测仪器。
二、技术指标　　
    ★测量范围：0～1200μm。
    ★测量精度：±（1～3%H+1μm）。
    ★分辨 率：1μm。
    ★小测量面直径：φ10 mm。
    ★显示：4位LCD显示测量的平均值、大值、小值、标准偏差和测量次数，同时指示仪器的工作状态及电池使用情况。
    ★电源：6F22型9V电池一节。
    ★外形尺寸: 160mm×80mm×30mm。
    ★质量：约250g。
    ★使用环境：温度0℃～40℃；相对湿度不大于90%。
三、基本配置
    ★HCC-25电涡流式测厚仪 1台
    ★6 F22型9V电池 1节
    ★标准箔片 3片
    ★基板 1块
    ★产品合格证 1份
    ★产品保修卡 1份
    ★产品使用说明书 1份
    ★仪器箱 1只
    ★试片盒 1只

One, product introduction
The product is based on eddy current method for work on coating thickness measuring instrument, apparatus is designed to meet the following criteria: ISO2360 and GB4957. With the company's other products HCC-24 coating thickness of the product is suitable for non magnetic conductive metal substrate non-conductive cover thickness measurement, for example: measurement of aluminum anodic oxide layer and aluminum, copper, zinc and other materials on the surface of paint, plastic and rubber cover layer thickness, in aviation, building materials, light industry, machinery, instruments, chemical and other industries has been widely applied. The apparatus is a kind of intelligent instrument. Due to the advanced wear guide sleeve type measuring probe and a single chip microcomputer application, make it has more remarkable characteristics, such as small measuring error, high reliability, good stability, simple operation, small volume, strong function, data processing, control and ensure product quality essential testing instrument.
Two, technical indicators
★measuring range: 0 ~ 1200μ M.
★measurement accuracy: + (1～ 3%H+1μ m ).
★resolution: 1 μ M.
★minimum measured diameter:φ10 mm.
★display: 4 LCD display the measured average value, maximum value, minimum value, standard deviation and measuring the number of times, at the same time indicating instrument of the working state and the battery usage.
★power: 6F22 9V cell section.
★dimensions: 160mm× 80mm× 30mm.
★quality: about 250g.
★use environment: temperature 0 ℃~ 40℃, relative humidity of not more than 90%.
Three, the basic configuration
★ HCC-25 eddy current thickness measuring instrument 1
In 6 F22 9V battery 1
The standard 3 piece of foil
★substrate 1 block
Product qualification certificate in 1 copies.
* product warranty card 1
Instructions for use of products 1
★instrument box 1
★test cassette 1