MC-2010A涂层测厚仪

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=1782

一、产品简介
    该仪器采用单片机技术，测量精度高、数字显示、操作简单方便、触摸按键、内置探头全量程测量、体积小、重量轻；强大的抗干扰能力，求值更稳定；且具有低电压指示、统计、系统/零点/两点校准功能，其性能已达到当代国际同类仪器的先进水平。
    该仪器采用磁性测厚法，可以方便无损地测量铁磁材料上非磁性涂层的厚度，如钢铁表面上的锌、铜、铬等镀层或油漆、搪瓷、玻璃钢、喷塑、沥青等涂层的厚度。该仪器广泛应用于机械、汽车、造船、石油、化工、电镀、喷塑、搪瓷、塑料等行业。
    该仪器采用电磁感应法测量涂（镀）层的厚度。位于部件表面的探头产生一个闭合的磁回路，随着探头与铁磁性材料间的距离的改变，该磁回路将不同程度的改变，引起磁阻及探头线圈电感的变化。利用这一原理可以地测量探头与铁磁性材料间的距离，即涂（镀）层厚度。
二、技术指标
    ★测量范围：0～1200um
    ★测量误差：<3%±1um
    ★小示值：1um
    ★显示方式：4位液晶数字显示
    ★电源：两节1.5v电池
    ★功耗：大功耗90mw
    ★外形尽寸：112mm*44mm*25mm
    ★重量：100g（含电池）
    ★使用环境温度：0℃～+40℃  相对湿度：不大于90%
    ★基体小厚度：0.5mm
    ★基体小平面的直径：7mm
    ★小曲率半径：凸:1.5mm；凹:6mm
    ★欠电压指示：右上角显示＂＂
    ★临界厚度小：工件铁基厚度大于1mm时,其涂（镀）层厚度的测量不受铁基厚度影响。
三、主要功能
    ★测量：内置探头全量程测厚
    ★统计：设有三个统计量：平均值、大值、小值
    ★校准：可进行零点校准、两点校准及系统校准
    ★电量：具有欠压显示功能
    ★蜂鸣提示：操作过程中有蜂鸣提示
    ★关机：具有自动关机和手动关机两种方式
四、配置清单
    ★MC-2010A涂层测厚仪，一台
    ★1.5v电池 (7号)，二节
    ★标准样片，一盒
    ★标准铁基，一块
    ★手提箱，一个
    ★说明书、合格证，一套

One, product introduction
The instrument uses single-chip technology, high measuring precision, digital display, simple and convenient operation, touch keys, built-in probe full range measurement, small size, light weight; strong anti-jamming ability, and is stable; and having low voltage indication, statistics, system / zero / two-point calibration function, and its performance has reached the international contemporary the advanced level of similar instruments.
The instrument uses a magnetic thickness method, can be convenient for nondestructive measurement of ferromagnetic material on the non magnetic coatings thickness, such as iron and steel on the surface of the zinc, copper, chromium coating or paint, enamel, glass steel, plastic, asphalt coating thickness. The apparatus is widely used in machinery, automobile, shipbuilding, petroleum, chemical, electroplating, spray, enamel, plastic and other industries.
The apparatus uses electromagnetic induction method for measurement of coating thickness ( coating). On the component surface of the probe to produce a closed magnetic circuit, with the probe and the ferromagnetic material between the distance changes, the magnetic circuit will change to a different degree, cause reluctance and probe coil inductance. Using this principle can accurately measure the probe and the distance between the ferromagnetic materials, coating layer thickness ( coating).
Two, technical indicators
★measuring range: 0～ 1200um
★measurement error: <3% ±1um
★minimum registranion value: 1um
★display mode: 4 LCD digital display
★power: two 1.5V batteries
Maximum power consumption of power: 90mw
★shape size: 112mm*44mm*25mm
★weight: 100g ( including battery)
★use environment temperature: 0 ℃~ +40 ℃relative humidity: not more than 90%
Minimum thickness of base: 0.5mm
★matrix minimum plane diameter: 7mm
★ the minimum radius of curvature of convex concave::: 1.5mm; 6mm
★an undervoltage indication: the upper right corner " "
★critical thickness of workpiece thickness greater than 1mm small: iron, its coated ( plating ) layer thickness measurement by iron-based thickness effect.
In three, the main function
★measurement: built-in probe full range of thickness
★statistics: has three statistics: average value, maximum value, minimum value
★calibration: can be zero calibration, a two-point calibration and system calibration
★n: has under-voltage display function
★beep tips: operation is the buzzing-reminding
★shutdown: shutdown is automatic and manual shutdown in two ways
Four, configuration list
★ MC-2010A coating thickness gauge, a
★ 1.5V battery ( 7 ), the two Festival
★standard samples, a box of
★standard iron, a piece of
In the suitcase, a
★manual, certificate of approval, a set of