HCH-2000E超声波测厚仪

武汉格莱莫检测设备有限公司  

电话：13545068882；027-86619889

传真：027-86619889  

网址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=1777

一、产品简介
    该仪器内部电路均采用新数字电子技术，具有体积小、功耗低、穿透力强、抗摔打、抗振动、示值稳定、检测精度高、可存储测量值、带公英制转换、全汉显中文菜单、大屏幕液晶显示、可连接微机、打印机等特点，是您在实际应用中的仪器。
    该仪器是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头，通过测量超声波在材料中传播的时间来确定被测材料的厚度。它可以对各种材料的板材和加工零件作测量；可以对生产设备中各种管道和压力容器进行监测，检测它们在使用过程中受腐蚀后的减薄程度。也可以在不去除所涂油漆层的情况下，准确的测量板材厚度。
    该仪器应用范围：用于测量硬质材料的厚度，如：钢铁、不锈钢、铝、铜、铬合金等金属材料，及塑料、橡胶、陶瓷、玻璃等非金属。该仪器广泛应用于石油、化工、电力、锅炉、冶金、造船、航空、航天等各个领域。
二、技术指标
    ★测量范围：0.7～500mm（45＃钢)。
    ★声速范围：1000～9990m/s
    ★显示精度：0.1mm
    ★测量误差：1％*厚度值±0.1mm
    ★使用环境：温度-10℃～60℃  相对湿度小于90％
    ★测量方式：手动存储测量
    ★存储容量：600个测量点
    ★外形尺寸：175＊70＊25mm3
    ★探头频率：2MHz-10MHz
    ★带自动背景光
    ★自动断电：本仪器待机五分钟将自动关机
三、基本配置
    ★HCH-2000E型主机                1台
    ★探头 (φ8、φ10各一支)          2支
    ★耦合剂                              1瓶
    ★7号电池                             2节   
    ★使用说明书                         1份
    ★保修卡、合格证                    1份
    ★手提箱                              1只
    选配件：                                                               
    ★打印机及通讯打印连线            1套  
    ★微机通讯软件                      1盘
    ★钢锉（选配）                      1把
    ★阶梯试块 （选配）               1块                 

One, product introduction
The circuitry within the apparatus are using the latest digital electronic technology, has the advantages of small volume, low power consumption, strong penetrating power, beat resistance, vibration resistance, showing the value of stable, high detecting precision, the measured value can store, with metric conversion, FSP was Chinese menu, large screen liquid crystal display, can be connected to computer, printer etc. in practical application, is your preferred apparatus.
The instrument is based on the principle of ultrasonic pulse reflection for thickness measurement, when the probe transmitted ultrasonic pulses through the object to be measured when reaching the material interface, pulse to be reflected back to the probe, through the precise measurement of ultrasonic propagation in materials to determine the thickness of material. It can be all kinds of material plates and processing parts for the accurate measurement of production equipment; all kinds of piping and pressure vessel monitoring, detecting them in the process of using the corroded thinning degree. Can not remove the oil paint layer, accurate measurement of the thickness of plate.
The application range of the apparatus for measuring the thickness of the material: hard, such as: Iron and steel, stainless steel, aluminum, copper, chrome and other metal materials, and the plastics, rubber, ceramics, glass and other non-metallic. The apparatus is widely used in petroleum, chemical, electric power, boiler, metallurgy, shipbuilding, aviation, aerospace and other fields.
Two, technical indicators
★measuring range: 0.7 ~ 500mm ( 45 mild steel ).
★velocity range: 1000～ 9990m/s
★display accuracy: 0.1mm
★measurement error: 1%*±0.1mm thickness
★use environment temperature: -10℃ ~ 60 ℃ and relative humidity less than 90%
★measurement mode: manual storage measurement
★storage capacity: 600 measurement points
★size: 175 * 70 * 25mm3
★probe frequency: 2MHz-10MHz
★with automatic background light
Automatic power-off: this instrument will automatically shutdown standby for five minutes
Three, the basic configuration
★HCH-2000E host 1
★probe (φ 8,φ 10 each ) 2
★coupling agent 1 bottles
★No. 7 battery 2
In 1 of the usage manual
★warranty card, Certificate in 1 copies
Suitcase 1 only.
Optional accessories:
Printer and print 1 sets of communication line
★microcomputer communication software 1 set
★file ( optional) 1
★step block ( optional) 1 block