水池快速制冷机

产水池快速制冷机简介：

▲ 本产品采用触摸式防水防尘控制面板，制冷温度3～30℃可调，接触器属法国施耐德、韩国LG系列，控制系统采用模块化设计，并装有系统进酸碱保护电流过载保护高低压保护及时间延时保护等多项保护装置，如有故障及时报警并显示故障。
▲This product is waterproof and dustproof touch control panel,cooling temperature 3～30℃ adjustable,schneider contactor is France, South Korea's LG series, the control system is modular in design and equipped with current overload protection system into high and low pH time delay protection and protection of a number of protective devices, if failure timely alarm and display fault.

▲ 本产品采用全新原装进口压缩机，属三洋、谷轮、松下系列，使产品的能效比更高。冷凝器采用翅片式的设计，蒸发器采用内螺纹铜管水箱盘管式设计，能有效提高热效果,清洗也方便。
▲The imported product with a new compressor, is a sanyo,copeland,panasonic series, so that higher energy efficiency of products. finned condenser design of high-efficiency, high-efficiency evaporator coil inside the threaded brass tank design can effectively improve the thermal effect, but also easy to clean.

▲ 水泵意大利、台湾大流量高扬程水泵，使用超静，省电。机体外壳用静电粉体涂料烤漆，美观大方。装有不锈钢水箱，清洗方便快捷。水箱内含有浮球自动补水装置，可用来测量并控制水位，从而有效地为客户节省时间并提高工作效率。
▲Pump selection Italy, Taiwan, high flow high head pumps, the use of security ultra-quiet, energy-saving durable electrostatic powder coating with the body shell paint, nice. Equipped with a stainless steel water tank, clean and convenient. Automatically fill the tank with float water plant, used to measure and control the water level, so as to effectively serve customers save time and improve efficiency.

水池快速制冷机优点：

风冷式设计，除配备箱型机组的所有性能外，无需加装冷却水塔和冷却水泵，安装简单、操作方便，可装整机安装在室外，节约生产场地及空间，可降低噪音，集中供应冷水，适用于中小型生产设备(此机型适合北方及缺水源的地区)大部分机型可同时带热回收，在提供冷源时可提供热能，适合用冷热需求的场所和加工用途。

Air-cooled design, with a box-type unit in addition to all the performance, but without the installation of cooling towers and cooling water pumps, installation is simple, easy to operate, the whole installation can be installed outdoors, saving space and production space, reduce noise, focus on supply cold water,suitable for small and medium sized production equipment(the model for the northern areas and water sources) most of the models at the same time with heat recovery, in the provision of the cold source to provide heat, hot and cold with the demand for places and processing purposes.

水池快速制冷机可分为①水冷式冷水机（设计箱型、柜式、开放式）②风冷式冷水机（设计箱型、柜式）风冷螺杆式冷水机组（箱型、柜式设计）③激光冷水机（箱型设计） ④电镀-氧化冷水机 ⑤反应釜冷水机⑥水冷螺杆式冷水机组（开放式设计）⑦镀膜机冷水机⑧低温型冷水机（-5- -40度）（箱型、柜式、开放式设计）⑨UV固化机、LED冷水机⑩超声波清洗冷水机

九本制冷教您如何选购水池快速制冷机机

▲非启停式的冷冻机其实是控制冷冻机内冷媒流向来控制制冷循环水的温度。按照冷冻机的制造原理，一共分为2种控制方式，在5度以内采用冷媒流向的控制方式，使冷冻机可以控制温度在正负0.1度，在5度以外采用压缩机启停方式，使冷冻机在不需要强烈制冷的情况下节能工作。 基于冷冻机的工作方式，对于冷冻机的制冷精度要求基本上可以满足(精度要求高的可以采用冷媒流向的控制方式)。 　　剩下来就是制冷功率和水泵的选型要求了，只要考虑了具体的发热量，就可以选用不同制冷量的冷冻机，然后再看水泵的扬程和流量需求，选择不同的水泵。这样就可以找到合适的冷冻机了。

应用行业：

激光技术、焊接、塑料成型、注塑、挤塑、吹瓶、热力塑型、机械切削加工、非切削加工、铸造、表面处理、电镀、电泳、医疗设备、电子行业、电路板生产、电子蕊片制造、化工、造纸、制药业、食品加工业、铝型材、铝合金、钢化玻璃、镀膜玻璃生产、超声波清冼、首饰加工、皮革、皮草加工、油墨生产、养殖业。

▲Box-type air-cooled chiller Main application: laser technology, welding, plastic molding, iniection molding, extrusion,blow molding, thermal modeling, mechanical machining, non-cutting machining, casting, surface treatment, electroplating,electrophoresis, medical equipment , the electronics industry,circuit board production,manufacture of electronic microarrays,chemical, paper, pharmaceutical, food processing,aluminum,aluminum alloy, tempered glass, coated glass production,ultrasonic cleansing, jewelry processing, leather, fur processing,printing ink production and aquaculture.

本公司所有设备已通过：2008 idt GB/T19001-2008标准认证证书；CE认证；请放心购买

All the equipment of the company has passed IDT GB/T19001-2008 :2008 standard quality management system certification; CE certification; please rest assured to buy.

设备参数表一

设备参数表二

备注：

1.以上参数配置为我公司标准产品配置，如对特殊或非标参数配置，我公司可根据要求定做。

2.制冷量根据空气干/湿球温度35℃/24 ℃，冷却水进出水温度12℃/7℃。污垢系数0.88㎡℃/Kw计算得出。

3.设备运行环境温度范围15℃~43℃。