水冷式制冷机【循环水制冷机】

【九本牌】水冷式制冷机【循环水制冷机】型号介绍

JBS-9W     JBS-12.W     JBS- 16W     JBS-19W     JBS-25W     JBS-31W     JBS-37W     JBS-47W

JBS-62W    JBS-78W      JBS-93W     JBS-112W    JBS-124W    JBS-140W    JBS-155W    JBS-186W

荣幸为您推荐【九本牌】水冷式制冷机【循环水制冷机】_冷冻机_冷却机_制冷机_冰水机_冻水机_冷凝机_水冷机_风冷式冷水机。

水冷式制冷机【循环水制冷机】可分为①水冷式冷水机（设计箱型、柜式、开放式）②风冷式冷水机（设计箱型、柜式）风冷螺杆式冷水机组（箱型、柜式设计）③激光冷水机（箱型设计） ④电镀-氧化冷水机 ⑤反应釜冷水机⑥水冷螺杆式冷水机组（开放式设计）⑦镀膜机冷水机⑧低温型冷水机（-5- -40度）（箱型、柜式、开放式设计）⑨UV固化机、LED冷水机⑩超声波清洗冷水机

九本制冷教您如何选购制冷机 ：

▲非启停式的制冷机其实是控制制冷机内冷媒流向来控制制冷循环水的温度。按照制冷机的制造原理，一共分为2种控制方式，在5度以内采用冷媒流向的控制方式，使制冷机可以控制温度在正负0.1度，在5度以外采用压缩机启停方式，使制冷机在不需要强烈制冷的情况下节能工作。基于制冷机的工作方式，对于制冷机的制冷精度要求基本上可以满足(精度要求高的可以采用冷媒流向的控制方式)。剩下来就是制冷功率和水泵的选型要求了，只要考虑了具体的发热量，就可以选用不同制冷量的制冷机，然后再看水泵的扬程和流量需求，选择不同的水泵。这样就可以找到合适的制冷机了。

▲Non start stop type refrigerator is to control the refrigerant flow in the refrigerator to control the temperature of the cooling water. According to the principle of the refrigerator, is divided into 2 kinds of control mode, control mode using the coolant flow direction within 5 degrees, the cooling machine can accurately control the temperature in the positive and negative 0.1 degrees, 5 degrees in the outside of the compressor start stop mode, the cooling machine without the need for such work under the condition of strong cooling. Based on the working mode of the refrigerator, the refrigeration precision requirement of the refrigerator can basically meet the requirements of high precision and can be controlled by the refrigerant flow direction. The rest is the selection of refrigeration power and pump requirements, as long as the account heat specific, refrigeration machine can choose different cooling capacity, and then look at the pump head and flow requirements, choose a different pump. So we can find the right refrigerator.

水冷式制冷机【循环水制冷机】产品简介：

▲ 性能稳定：采用多个压缩机并联使用。每个压缩机自带一个独立的制冷回路。即蒸发器、冷凝器也完全独立；所有压缩机由统一的微电脑控制系统指挥，逐个开、关机，相互之间绝不会相互干扰,加上该品牌机全部采用原装正品制作，单机故障率极低，综合以上原因，可以保证该系列机有着高度稳定的性能，在长年连续运行情况下之，而无需再购其它备用机。
▲ Performance and stability: the use of multiple parallel compressors,each compressor comes with a separate cooling circuit that is the evaporator and condenser are completely independent; all compressor microcomputer control system by the unified command, to open one by one, off each other will not interfere with each other between, plus the original authentic brand of machine used in all production stand-alone failure rate is very low,the above reasons,we can ensure that the machine has a series of highly stable performance,long years of continuous operation in case the first choice, without having to repurchase another spare machine.

▲ 省电节能：采用多个中小功率压缩机并联使用,开、关机时对电网的干扰极小，随着负荷的变化，机组便自动确定开机的数量，保证开启的压缩机处于佳工作状态，从而有效节约电能。
▲ Energy saving: The number of small and medium power compressors used in parallel, open, shut down the grid when the minimum interference with the load changes, the unit will automatically determine the amount of power to ensure the open state of the compressor work in the most short-tailed bird effectively save energy.

▲ 使用寿命长：蒸发器、冷凝器设计非常合理，并且置于压缩机上方，在整个运行过程中，绝大部分润滑油始终停留在压缩机内，保证压缩机的良好润滑。
▲ Long life: evaporator, condenser design is very reasonable, and placed in the top of the compressor, the entire run, the vast majority of oil within the compressor has stopped faint, to ensure good lubrication of the compressor.

制冷机主要应用行业：

激光技术、焊接、塑料成型、注塑、挤塑、吹瓶、热力塑型、机械切削加工、非切削加工、铸造、表面处理、电镀、电泳、医疗设备、电子行业、电路板生产、电子蕊片制造、化工、造纸、制药业、食品加工业、铝型材、铝合金、钢化玻璃、镀膜玻璃生产、超声波清冼、首饰加工、皮革、皮草加工、油墨生产、养殖业。

▲Box-type air-cooled chiller Main application: laser technology, welding, plastic molding, iniection molding, extrusion,blow molding, thermal modeling, mechanical machining, non-cutting machining, casting, surface treatment, electroplating,electrophoresis, medical equipment , the electronics industry,circuit board production,manufacture of electronic microarrays,chemical, paper, pharmaceutical, food processing,aluminum,aluminum alloy, tempered glass, coated glass production,ultrasonic cleansing, jewelry processing, leather, fur processing,printing ink production and aquaculture.

▲ 此系列机型可定做超低温型（可低至零下40度）

▲ These models can be custom-made series of ultra-low temperature (as low as minus 40 degrees)

水冷式制冷机【循环水制冷机】设备优点 ：

水冷式箱型设计，水箱内置于机组内，底部装有活动脚轮，外形美观，可随意改换安装的位置及设备，可安放于生产车间内，并具备多段能量调节适用于配套中小型生产设备（此机型需要安装配备相应的冷却水塔、冷却泵）。

Water-cooled tank design, tank built into the unit, the base fitted  with casters, pleasing in appearance, can easily change the location and installation of equipment can be placed in the workshop,and has multi-adjustable for supporting small and medium sized energy production equipment (This model is equipped with a corresponding need to install cooling towers,cooling pumps).

本系列冷水机均采用多机联用技术，使得冷水机性能更佳。

This series chillers are used in conjunction with multi-machine technology, making the chiller better performance

本公司所有设备已通过：2008 idt GB/T19001-2008标准认证证书；CE认证；请放心购买。

All the equipment of the company has passed IDT GB/T19001-2008 :2008 standard quality management system certification; CE certification; please rest assured to buy.

设备参数表一

设备参数表二

备注：

1.以上参数配置为我公司标准产品配置，如对特殊或非标参数配置，我公司可根据要求定做。

2，制冷量是依据冰水入口温度12℃，出口温度7℃；冷却水进口温度30℃，出口温度35℃计算

得出。

3，目录规格如有变动，恕不另行通知。